Software upgrade for the access control you already own ENEspañol中文For locksmithsFor integratorsSign in(281) 536-6272[email protected]
GateStride

Early access · now piloting on Kantech EntraPass

Walk in. The door knows.

GateStride adds hands-free, phone-first unlock and smart sensing to the Kantech access control you already own, with no rip-and-replace. Staff walk up with their phone in a pocket, you see who has left without anyone swiping out, and you stop paying per person and per badge.

An add-on, not a dependency. If GateStride is ever offline, your existing access control keeps working exactly as before.

A professional walking through the glass entrance doors of a modern office
  • No rip-and-replace
  • Locks, egress & fire release untouched
  • No biometrics by default
  • Installed by licensed local locksmiths and integrators

Works with Kantech EntraPassHoneywellLenelS2 OnGuardSoftware House C•CUREHIDBrivo

Who it is for

Built for the people at the door, the people who run it and the people who install it.

A person holding a phone in an office
For employees

Your phone is your key, and it stays in your pocket.

Walk up and the door opens. A tap in the app works too, and your phone buzzes when the door has opened.

Get the app
A card reader beside an office door
For facilities and enterprise on Kantech

You invested in Kantech. Keep it.

GateStride modernizes it in place: hands-free unlock, exit tracking, radar sensing and a tamper-evident audit, with no panel swap and no re-badging staff.

Upgrade a Kantech system
A small door node device mounted near a door
For locksmiths, resellers and integrators

Sold and installed through the channel.

GateSmith is one app to claim and commission doors, calibrate the radar and survey a site. Keep the Kantech base you already sell and add more value per site.

Become a GateStride integratorPartner sign-in
Illustration: a phone showing an unlock confirmation held near an office door reader
Phone unlock

No more card swipe.

The credential lives in the phone’s secure chip. As people walk up, the door node verifies it over Bluetooth and opens through your existing panel — nothing to tap, print or hand back.

  • Phone, watch or tablet, each with its own key
  • Invite to enroll, one click to revoke
  • Keeps working if the internet is down
How phone unlock works
Office workers walking out of a modern office building
Exit tracking

Know who left — without anyone swiping out.

Card systems log people coming in, not going out, because exits release freely. GateStride records who left from the phone they carry, so you always know who is still inside.

  • Live who’s-inside list for every site
  • One-tap roll call at the muster point
  • First-in, last-out and hours, exportable
How exit tracking works
A business owner reviewing invoices at a desk with a laptop and calculator
Lower running cost

Stop paying per person to open a door.

GateStride connects to your system as a single integration user and manages your people itself, so staff who move to phone access stop adding per-user credential fees — and nobody needs a badge printed.

  • No per-seat growth as you hire
  • No badges to buy, replace or chase
  • No rip-and-replace project
Calculate your savings
An overlay, not a rip-and-replace

Keep your locks, egress and certifications exactly as they are.

GateStride sits on top of your access-control system. It reads that system’s events and calls its own unlock — so your doors, fire-safety, request-to-exit and UL certifications never change. One small server in the comms room, one node at the door, and you’re live.

Kantech EntraPassHoneywell LenelS2 OnGuardSoftware House C•CURE HIDBrivo & more via REST
An office corridor with doors along one side
Our own office

Our own Kantech never knew who left. Now it does.

When our founder, Tom Jin, rented our office in Spring, Texas, the previous tenant had left a 4-door Kantech system behind. The hardware looked good, so we kept it: we read the panel, called Kantech for an installer and started with cards. Then the daily problem showed up — people waved cards and wallets at the reader to get in, but nobody badged out, so the system never recorded who left. With the GateStride phone app, exits are identified and nobody waves a card any more. Every reader, lock and controller is still the original.

Read the full story
How it works

Live in three steps.

Enroll a phone

Send an invite; the employee’s phone generates a key and binds it. The private key never leaves the device’s secure element.

Walk up to the door

A node at the door runs an encrypted challenge-response over Bluetooth and unlocks through your existing panel — all decided locally.

See everything

The center shows live occupancy, entries and exits, attendance and a tamper-evident audit — across every door and site.

More than a door opener

Everything that falls out of knowing who’s in and who left.

Visitor passes

Send a pass by text or email for chosen doors and times. It expires on its own.

Exit tracking

The missing half of every access log, finally recorded.

Live occupancy

A real-time, accurate headcount of who is inside, by site.

Fire muster roll call

One tap produces the list of who to account for in an evacuation.

Attendance & reports

First-in / last-out and hours, exportable to CSV.

Multi-site & multi-tenant

One app, many companies — each with its own keys and branding.

Security by design

Built to the standard a door deserves.

  • Keys stay on the phone. The private key is created and held in the device’s secure element (StrongBox / Secure Enclave) and never leaves it.
  • Local challenge-response. Unlocking is a signed exchange at the door; the central server is never in the real-time path.
  • Works offline. Door nodes keep verifying from a cached, signed credential set when the network is down.
  • Credentials encrypted at rest. Links to the underlying system are stored encrypted and never exposed through the interface.
  • Tamper-evident audit. Every security event is hash-chained, so any change to the record is detectable.
  • Privacy-first, no biometrics by default. GateStride uses device credentials and person detection — not facial recognition. Face recognition is optional, off by default, and supported only where it is legally compliant and you choose to enable it.
A security technician installing equipment in an office
For locksmiths & integrators

More income from the sites you already service.

Sell an upgrade instead of waiting for a replacement. No rip-out and no re-certification — a node at the door, resale margin per site, and the customer stays yours, on the hardware you installed instead of a new cloud platform.

For locksmiths Become a GateStride integrator

Serving offices across 20 US metros

Local rules, licensing and evacuation realities for each city, and licensed integrators on the ground.

See all 20 locations

See it on your own doors.

A short demo on your existing access control — or talk to us about adding GateStride to the systems you already install.